 |
|
Floating
Connector
Conectores
flotantes
|
|
 |
|
Ahora MPE-Garry
puede suministrar regletas de pines de
paso 2,54 mm en versiones de 1 fila con
un cuerpo aislado de 1,70 mm. Dimensión
de los pines 0,635 mm. Estas regletas
están disponibles en versiones
rectas como acodadas. La ventaja de
estas regletas es el ahorro de espacio
que suponen.
Now
MPE-Garry can deliver pin header, pitch
2,54 mm in 1-rowed version with an
insulating body of height 1,70 mm.
Dimension of pins 0,635 mm. These pin
header are available in straight as well
as in angled version. Advantage of these
pin header is the space saving version.
The angled pin header shows...
|
|
 |
|
MPE-Garry
presenta una nueva familia de conectores
en su línea de suministro. Esta
família de conectores placa a placa permite
realizar placas de circuito impreso en
forma de sandwich desde una
distancia de solamente 1,50 mm. El
número de contactos disponibles va
desde 10 a 70. Los contactos son de oro
plateado y se suministran en tubos.
MPE-Garry
shows a new connector family in it's
delivery line. That Board-to-Board
connector family enables to realise PC-boards
in Sandwich form with a distance of only
1,50 mm. Pole numbers are available from
10 - 70. Contacts are gold-plated and
they are delivered in tubes. That space
saving version...
|
|
 |
Con
la serie 520 MPE-Garry desarrolló un
nuevo conector. Estos conectores
permiten conectar 2 placas de c.i., de
paso 1,27 mm 90°. Por un lado, una
conexión SMD, y por el otro lado es
para soldar. El conector puede ser
utilizado también en una conexión no
fija, con anchos de conexión
disponibles con un pin cuadrado de 0,40 mm
....
With
series 520 MPE-Garry developed a new
connector. That connectors enables to
connect 2 PC-boards, pitch 1,27 mm 90°.
One connecting side in SMD, the other
connecting side is for soldering in.
Connector can also be used in an unfixed
connection, as plugging width avails of
an 0,40 mm square
pin....
|
|
 |
Con
este zócalo MPE-Garry ofrece la
posibilidad de fabricar sub-componentes
completamente con técnicas en SMD.
Ventajas: Todos los componentes pueden
ser fabricados en ensamblaje
superficial.
Este zócalo especial es un conector de
E/S de la serie SUB.
With
that socket MPE-Garry offers the
possibility of manufacturing SUB-Components
completely in SMD-Techniques. Advantage:
The entire components can be
manufactured in surface assembly.
That special socket is an IO-connector
of the SUB-Series. With the extremely
flat height of 0,70 mm a very high...
|
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
|
The
product family 401 of MPE-Garry has been
enlarged by a female header bottom entry
in 1- as well as in 2-rowed version, total
height 8,5 mm. Advantage of that female
header: 2 soldering pins per contact are
in the 1-rowed version. A soldering area
of 3 mm with soldering support - retention
pin - is available. Soldering area of 3 mm
with soldering support = fish hook for
better working is available.
That female header exists in the 1-rowed
version with pitch solder distance of
3,17/ 3,96 and...
|
|
|
|
Male
Header STL 1R series 400, Insulator-Body
1,7 mm
The series 400 offers male headers with
round contacts in an insulator-body of 1,7
mm height. This is a very cost saving
method for a connecting height of at least
4,15 mm. Due to the round contacts and the
4-finger-contacts in the female header a
very reliable connection is guaranteed.
For more information please order our
catalogue „Board-to-board Connectors“.
|
|
|
