Empresa

Localización

Productos

RR.HH

Calidad

Trabajo

Welcome  

Willkommen  

Benvinguts  

Bienvenidos

Novedades

Ferias 

Buscar

Catálogo

Horario

Calendario

features

• three way isolated
• multiple operating ranges
• two frequency ranges
• dip-switch settable
• isolation up to 1000V
• adjustable zero and gain
• short circuit protected
• rail mountable

features

• continuous power regulation and controlled direction change
• adjustable current limit, acceleration ramp and max. power limit
• load short circuit protected
• CB-mode for increased starting torque
• high efficiency, small size
• controllable with potentiometer, switch or voltage signal
• rail mounting base available

features

• no supply required
• operation range 0...25mA
• isolation up to 2000V
• low voltage drop
• over current protected
• over voltage protected
• incorrect polarity protected
• wide input voltage range
• rail mountable

features

• eight frequency ranges
• isolated input
• high linearity
• various input options
• output signal mA or V
• good output filtering
• output short circuit protected
• adjustable zero and gain
• rail mountable

features

• five different output signals
• supply isolated from signal
• regulated potentiometer 1...47 kohm
• adjustable zero and gain
• short circuit protected output
• rail mountable

features

• wide operating voltage range
• operates in current loop
• selectable filtering
• adjustable zero and gain
• over voltage protected
• incorrect polarity protected
• easy to connect
• rail mountable

features

• wide operating voltage range
• 4...20 mA / 1.5 V output
• multiple ranges
• three wire compensated
• inbuilt linearisation
• adjustable zero and gain
• over voltage protected
• incorrect polarity protected
• easy to connect
• rail mountable

features

• measures TrueRMS
• input ranges 5A and 1A
• output 4...20mA and 1...5V
• settable gain
• over current protected
• reverse current protected
• easy to connect
• rail mountable

features

• three way isolated
• multiple operating ranges
• also for bipolar signals
• dip-switch settable ranges
• two frequency ranges
• adjustable zero and gain
• isolation voltage 1000V
• short circuit protected
• rail mountable

features

• measures TrueRMS
• input ranges 145, 230 and 400Vac
• output 4...20mA and 1...5V
• settable gain
• over current protected
• reverse current protected
• easy to connect
• rail mountable

features

• wide operating voltage
• multiple input ranges
• trip and hysteresis adjusts
• adjustable on- and off-delay
• isolated supply voltage
• relay output with co-contacts
• over voltage protected
• incorrect polarity protected
• easy to connect
• rail mountable

features

• 4-quadrant operation
• continuous / 2-step speed control
• adjustable current limit
• logic inputs for presettable speed
• RI-adjust for load compensation
• selectable rundown mode, braking / flywheeling
• high efficiency
• din-rail mountable

features

• 8-channels
• selectable input mode n.o. or n.c. alarm contacts
• settable input delay
• settable alarm output delay
• relay output for alarm
• blinker and memory for alarm
• realtime indication
• invertable outputs
• test function

features

• 8-channels
• selectable input mode n.o. or n.c. alarm contacts
• settable input delay
• settable alarm output delay
• relay output for alarm
• blinker and memory for alarm
• realtime indication
• invertable outputs
• test function
• Type Approved by Lloyd's Register

features

• wide supply range
• isolation voltage 1500V
• 12-bit linearity
• small size
• single and dual channel units
• over current protected
• over voltage protected
• easy to connect
• rail mountable

features

• wide supply range
• isolation voltage 1500V
• 12-bit linearity
• small size
• single and dual channel units
• over current protected
• over voltage protected
• easy to connect
• rail mountable

features

• 8-channels
• selectable input mode n.o. or n.c. alarm contacts
• settable input delay
• settable alarm output delay
• relay output for alarm
• blinker and memory for alarm
• realtime indication
• invertable outputs
• test function

features

• drive / braking in both directions
• three operating modes
  • direct speed drive
  • speed drive with feedback
  • positioning with feedback
• easily adjustable parameters
• adjustable / controllable current limit
• stop control
• regenerative braking
• scaling adjusts for feedback
• 5V and 2.5V reference outputs
• differential input ±10V max.
• high efficiency, small size

features

• drive / braking in both directions
• three operating modes
  • direct speed drive
  • speed drive with feedback
  • positioning with feedback
• easily adjustable parameters
• adjustable / controllable current limit
• stop control
• regenerative braking
• scaling adjusts for feedback
• 5V and 2.5V reference outputs
• differential input ±10V max.
• high efficiency, small size

features

• three way isolated
• multiple output ranges
• 254 steps
• dip-switch settable
• multiple ramp speeds
• zero and gain fine adjustments
• isolation voltage 1000V
• short circuit protected output
• rail mountable

features

• Direction change
• Braking
• Continuous / 2-step speed control
• Adjustable acceleration / braking ramp
• Adjustable current limit
• Adjustable load compensation
• Supply voltage variation compensated
• High efficiency
• Self recovery fuse
• Rail mountable

features

• wide frequency range
• True RMS measurement
• also for thyristor power controller
  and inverter current measurement
• dip switch settable
• 50A RMS (150A peak)
• mA and V output
• gain and zero adjustment
• over voltage protected
• reversed polarity protected
• easy to connect
• rail mounting base available

features

• wide frequency range
• True RMS measurement
• galvanic supply isolation
• also for thyristor power controller
  and inverter current measurement
• dip switch settable
• 50A RMS (150A peak)
• mA and V output
• gain and zero adjustment
• over voltage protected
• reversed polarity protected
• easy to connect
• rail mounting base available

features

• acceleration / velocity measuring mode
• galvanically isolated power supply
• settable lowpass & hipass filters
• compact size
• alarm and warning relay output
• TrueRMS output, mA-signal

features

• load regulated adjustments
• adjustable base level
• two wire connection
• small size
• high efficiency > 90%
• wide power range 0.5 - 80W
• EMC-tested (no radio frequency interference)
• panel mountable

features

• panel mounted
• adjustable initial level
• for inductive loads (motor/coils)
• small size
• high efficiency >90%
• power range 2-100 W
• EMC tested (CE)
• overload and short circuit protected

features

• acceleration sensor
• 5g and 50g version
• good stability
• linear frequency response
• internal buffer amplifier
• wide supply voltage range
• MEMS-type based

features

• True RMS measurement
• reading in mm/s or m/s²
• frequency tunable band-pass filter
• low power consumption
• two sensor options
• auto power off
• good low frequency features
• easy to use
• compact size

applications

• total level vibration measuring
• vibration frequency measuring
• vibration analysis

features

• 8-channels
• three way isolated
• multiple operating ranges
• two frequency ranges
• dip-switch settable ranges
• high 12-bit accuracy
• wide operating voltage range
• incorrect polarity protected input
• over current protected output
• small size

features

• 4-quadrant
• protection with self recovering fuse
• settable current limit
• settable acceleration/brake ramp
• load compensation
• special braking options
• supply voltage compensation
• continuous / 2-step speed controlling
• positive driving logic
• mounting with DIN-rail or screws
• high efficiency

features

• 4-quadrant
• protection with self recovering fuse
• settable current limit
• settable acceleration/brake ramp
• load compensation
• special braking options
• supply voltage compensation
• speed control ±10V ( ±5V )
• positive driving logic
• mounting with DIN-rail or screws
• high efficiency

features

• three phase output
• direction change
• hall-transducer supply and input
• supports 60° and 120° commuting
• adjustable current limit
• direct or freq.locked driving
• inbuilt fuse
• rail mounting base fittable

features

• small size
• 4-quadrant drive
• high efficiency > 92%
• motor range 50-500W
• rail mounting base fittable
• adjustable current limit
• adjustable ramp

features

• bipolar chopper
• wide operating voltage range
• Full and half stop operation
• 7-settable phases
• Auxiliary oscillator
• Acceleration ramp, 3-speed
• Self recovery fuse
• Rail mounting base fittable

features

• Bipolar chopper
• Wide supply voltage range
• Full-, half-, quarter-, and 1/8-step operation
• 8-programmable phase currents
• Auxiliary oscillator
• Acceleration- and braking ramp
• Self recovery fuse
• Very high efficiency
• Low heat dissipation
• Rail mounting base available

features

• controlled direction change
• soft startup, ramp
• trip or continuous current limit mode
• settable current limit
• high efficiency
• high momentary load capasity
• rail mounting base fittable

features

• controlled direction change
• soft startup, ramp
• trip or continuous current limit mode
• settable current limit
• high efficiency
• high momentary load capasity
• rail mounting base fittable

features

• small size
• positioning precision 1/400
• high efficiency >92%
• for motors 5-100W
• rail mounting base fittable
• adjustable current limit
• adjustable output current
• adjustable positioning window
• settable maximum speed

features

• load regulated adjustment
• adjustable base level
• suitable for common-negative or common-positive system
• EMC tested ( no radio frequency )
• high efficiency >90%
• rail mountable

features

• small size
• positioning precision 1/400
• high efficiency >92%
• for motors 10-300W
• rail mounting base fittable
• adjustable current limit
• adjustable output current
• adjustable positioning window
• settable maximum speed

features

• triac, phase angle controller
• 10...200W, suitable loads:
  resistor, fan motor and transformer
• base level adjustment
• 0...10V or 4...20mA control
• galvanic isolation
• rail mountable
• EMC tested

features

• small size
• low cost
• pos. accuracy typ. ±1%
• good efficiency >92%
• for motors 5-200W
• start- and stop-ramp
• overload protected
• selectable current limit
• rail base mountable

features

• pos. accuracy typ. ±1%
• high efficiency >92%
• for motors 5-200W
• start- and stop-ramp
• overload protected
• error indication
• control value with pot. or voltage
• 128, 256, 512, 1024 pulse ranges
• adjustable current limit
• rail base mountable
• EMC-tested (CE)

features

• small size
• pos. accuracy typ. ±1%
• good efficiency >92%
• for motors 5-200W
• start- and stop-ramp
• overload protected
• adjustable current limit
• adjustable range

features

• Bidirectional
• No brake
• Controlled direction change
• ± 10 V or 0...10 V control
• Soft start ramp
• Adjustable current limit
• Load compensation
• High efficiency
• High peak loading
• Rail base fittable

features

• Unidirectional
• 2-quadrant, drive and brake
• Dynamic and regenerative braking
• Smooth startup ramp
• Adjustable current limit
• Load compensation
• High efficiency
• High peak loading
• Rail base fittable

features

• Fast change of direction
• Soft startup, acceleration ramp
• Settable current limit
• Trip or continuous current limit
• High efficiency
• Dynamic braking
• High peak load capacity
• Rail base fittable
• Freewheel option
• Two control modes

features

• 1-quadrant
• Panel mountable
• Small size
• Motor size 5-80W
• Good speed regulation
• Load comp. adjustable RxI
• Adjustable current limit
• EMC tested (CE marked)
• Overload and short-circuit protected

features

• Bipolar chopper
• Wide supply voltage range
• Full-, half-, quarter-, and eighth-step operation
• 8-programmable phase currents
• Auxillary oscillator
• Acceleration- and braking ramp
• Power reduction
• Self recovery fuse
• Very high efficiency
• Low heat dissipation
• Rail base fittable

features

• Bipolar chopper
• Wide supply voltage range
• Full-, half-, quarter-, and eighth-step operation
• 8-programmable phase currents
• Auxillary oscillator
• Acceleration- and braking ramp
• Power reduction
• Self recovery fuse
• Very high efficiency
• Low heat dissipation
• Rail base fittable